Community Applications

AppSite
Familiar with the AppStore?This app does what the AppStore does, but do not expect shiny graphics sincewe can only do so much with AWT.Any way . In order to have this app running on the bug, you will need to give it Internet access. if you don’t know how, look... more

Administrators: switch

API version: not specified
Tags: not specified

bugdash
BUGdash is a web-based admin tool for managing software and viewing settings on BUG. Download com.buglabs.osgi.sewing and BUGdash from BUGnet. Make sure your BUG is on your network (via USB connection or WiFi module). From your browser, go to http://your_bug_address/admin. That’s it. If everything goes well, you should see an... more

Administrators: akweon, kgilmer, jconnolly

API version: 1.4.3
Tags: Admin  sewing  WebService  ConfigurationAdmin  modules  upgrade 

Puck
Notes:You must be using the latest rootfs and the integration build of Dragonfly (>= 1.0.0.1621) for this application to work.The application is configured for the BUGview module in slot 0 (top left-hand side slot) and BUGmotion in slot 1 (top-right).v1.0.6 01/27/2010Fixed an orientation issue with pucks movement due to switching... more

Administrators: finsprings
Collaborators: bcruskie, kgilmer

API version: 1.4.3
Tags: BUGMotion  bugview  accelerometer 

LCDbright
Simple App that sets LCD module backlight via BUGbase hot keys HotKey 1 = highHotKey 2 = medHotKey 3 = lowHotKey 4 = off more

Administrators: bcruskie

API version: 1.4.3
Tags: LCD  backlight  Hotkeys 

Backlite
Backlite is a simple program to change the LCD backlight. The backlight has 3 modes: Low, Med, High. Changing the value can be done two ways: a single click of the icon will cause the next highest setting and will loop back to lowest. Holding down the icon for a... more

Administrators: kgilmer

API version: 1.4.3
Tags: backlight  power  desktop  app  icon 

NeighborDiscovery
Java-based BUG Discovery application. It allows the discovery of neighbor BUGs using bluetooth or Avahi if BUGs are connected to the same IP network.Requires OpenJDK installed on target BUG. This application is a demo of the software that searches for a BUG and send a message to it. more

Administrators: bugsuchile
Collaborators: kgilmer

API version: 1.4.3
Tags: not specified

vonHippelAnalogDemo
This is a small app showing how to set the DAC channels and read the ADC on the vonHippel module. Some hints:Before using the DAC the DAC needs to be powered up by sending the suitable command to the DAC chip (MAX4820M ).e.g. writeDAC(0×0CF0) will wake up both channels The... more

Administrators: jamit
Collaborators: kgilmer, jconnolly

API version: 1.4.3
Tags: VonHippel  ADC  DAC 

VonHippelSerialExample
Simple app to set the serial port baud rate for the slot that the von hippel module is plugged into. In this case, it sets it to 19200 and write data to it for 100 seconds. more

Administrators: jconnolly

API version: not specified
Tags: serial  rs232  baud  19200  Example  howto  Simple 

KernelLogNotificationSource
An example application that relies on the inotify API to send kernel log messages to clients. more

Administrators: kgilmer

API version: 1.4.3
Tags: inotify  JNotify  Example  Tutorial 

JNotify Home Dir Listener
A super simple app that demonstrates the JNotify API. more

Administrators: kgilmer

API version: 1.4.3
Tags: inotify  JNotify  Example